One off set of CBT front Baffles and wideband drivers
$2,000.00
$2,000.00
per item
What is for sale are the ready made raw wood baffles with all the drivers required for them. The baffles are pre-drilled for the drivers and they have all been mounted once. The set uses 13 drivers per side for a total of 26 drivers.
The drivers are made by Mark Audio and are the paper versions of his widely admired wideband midwoofers sold as the EL70 by Creative Sound Solutions.
http://www.creativesound.ca/pdf/CSS-EL70-data-080909.pdf
The EL70's originally sold for $45 a piece. The making of the baffles are showcased in this website under :
http://www.kravchenko-audio.com/cbt.html
This project took a little over 20 hours to create and took almost $300 in material costs. They are priced at cost.
The wood sides are constructed of 8/4 (2" or 50mm) thick Tulip Polar. They are laid up in a brick laid fashion and laminated. The resulting blank was bandsawn and sanded to an exact form factor. They are ready to go for an intrepid builder who wants to get the sound of a CBT without all the headache of making a curved front baffle.
Simple composite calculation will yield you a line array sensitivity in the high 90's.
Price will include shipping.
Price includes assistance in determining optimal enclosure size for you purpose.
Also available are four PowerSoft plate amplifiers that are perfect for making your own active CBT. They allow a total of 6 channels per side.
Perhaps an integrated powered subwoofer?
The drivers are made by Mark Audio and are the paper versions of his widely admired wideband midwoofers sold as the EL70 by Creative Sound Solutions.
http://www.creativesound.ca/pdf/CSS-EL70-data-080909.pdf
The EL70's originally sold for $45 a piece. The making of the baffles are showcased in this website under :
http://www.kravchenko-audio.com/cbt.html
This project took a little over 20 hours to create and took almost $300 in material costs. They are priced at cost.
The wood sides are constructed of 8/4 (2" or 50mm) thick Tulip Polar. They are laid up in a brick laid fashion and laminated. The resulting blank was bandsawn and sanded to an exact form factor. They are ready to go for an intrepid builder who wants to get the sound of a CBT without all the headache of making a curved front baffle.
Simple composite calculation will yield you a line array sensitivity in the high 90's.
Price will include shipping.
Price includes assistance in determining optimal enclosure size for you purpose.
Also available are four PowerSoft plate amplifiers that are perfect for making your own active CBT. They allow a total of 6 channels per side.
Perhaps an integrated powered subwoofer?
SKU:
