Product polling

There is a page that I keep close watch on.  Yes it is the product polling page.  There are a few reasons why that is there.  It's a place for the DIY community to make themselves heard.  And I do check it at least once a week.

Clear interest is in a shallow 6.5 for car use and a shallow 8 for car use.

That means that there will be greatest efforts made to produce these products.  Ask for what you want and I will take a shot at costing and assembly methods.  If it makes economic sense I will make them.

A few things are in the mix on my end in terms of being able to rapidly develop prototypes.  I will be busy making posts on that front over the next few months.  Looks like I will be setting up a machine shop instead of farming out prototyping.  

The KAHTMAXX is just about ready.  Many interesting adventures on the assembly front as this is a very complex horn to assemble.  

​105db per watt down to 70 hertz.  That is a 2 pi spec.  In room will be higher as there are more reflections.  I'm finalizing a high frequency horn to match and it will be a force of nature.  This is Klipsch horn territory.  Without the nasty compression driver sound.  Yes you read that correctly.  Once you have heard a good planar you will know what I mean.  There is a floor standing version all mapped out that I call the Klipsch Horn killer.  An Fc of 30 hertz  on the low end.  And a similar midrange horn with a custom high frequency horn s well.  That will be produced some time in the winter.