Many people who are looking at this site are in the audio business. Many are actually professional car audio installers. And some of them actually own their businesses. I have been blessed with people that give me great design advice for what works and what is not gonna work in car audio. And I really appreciate it. We are close to doing a run of the shallow 6.5 inch drivers. And I'm wondering if there is any further advice. Also wondering if there is enough demand out there for a appreciable run size. Comments are enabled below if you are willing to write down what you think. Hello DF.
Yes these drivers are still in the works. I'm about ready to pull the lever on a driver run of four different types. I have been workingon something that has a little better X-max than what I have been currently working with. Greater linearity over the full stroke versus the older XBL^2 design. Higher efficiency to! Last benefit is 1/2 the distortion of the XBL type driver. So I am pretty primed to get some of these out into the hands of knowledgeable people.
5 Comments
DF
7/2/2017 11:46:31 pm
Yes, are these still on the table? Xmax and ability to be used in a 2 or 3 way is a must!
Reply
Mark Kravchenko
7/7/2022 11:25:35 am
It is possible for as few as 100 pcs. But that would have to be a custom run.
Reply
DF
3/8/2018 11:00:31 am
As has been my problem the past year there has been a lot of hurry up and wait. I had a father with terminal cancer to look after. He died a few weeks ago and I can slowly get back into the game of getting these drivers into people's hands.
Reply
Mark Kravchenko
7/7/2022 11:26:08 am
Thanks.
Reply
Leave a Reply. |
AuthorMark's Ramblings, show and tell. And other sundries. Archives
December 2019
Categories |